Engine >> Camshafts >> ANDREWS CAMS
Andrews

ANDREWS CAMS

More products by Andrews
$166.95

Description

  • Andrews Products grinds its cams with the help of a computer with cam design capabilities. This superior technology gives the utmost in both performance and reliability. Only the best alloy steel billets and heat-treating processes are utilized. Furthermore, the power in Harley's Evolution engines can be made even more convincing when a superior Andrews computer-designed high-performance cam is installed. These hydraulic lifter cams are capable of 6,000-plus rpm with stock springs and no valve float. Made in the U.S.A.
EV3 GRIND CAM
  • Bolt-in cam for light bikes (FXRS, etc.) adds significant mid-range power without affecting idle
  • A 6,000+ rpm cam for stock heads and springs with hydraulic lifters
EV7 GRIND CAM
  • Designed for big-inch stroker motors with head work
  • Works with stock hydraulics, with stock spring travel set to .560” minimum
  • Excellent in the 2,800-6,500 rpm range
  • Uses stock springs
EV5 GRIND CAM
  • Designed for mildly stroked motors or motors with head work done
  • Works with stock hydraulics, with stock spring travel set to .560” minimum
  • Excellent power in the 2,500-6,500 rpm range
EV13 GRIND CAM
  • Bolt-in cam for street or touring use with more mid-range and upperend power than the stock 88 EV cams
  • Especially effective in reducing oil temperature
  • Uses stock springs; works with carbs or fuel injection
EV23 GRIND CAM
  • Bolt-in cam for heavier touring bikes and high-geared bikes with 65-tooth rear pulleys
  • Crisp throttle response and strong pulling power from 1,500 to 6,000 rpm
  • Works well in higher altitudes
  • Uses stock springs; works with carbs or fuel injection
EV31 GRIND CAM
  • Super power for supercharged engines
  • Basically an EV27 cam with timing set for superchargers or big inch motors with 10.5+ compression ratio
EV46 GRIND CAM
  • Bolt-in performance cam with fast open and close ramps
  • Similar to “EV3” but higher static compression pressure for 4,000+ rpm with stock heads and hydraulic lifters
EV59 GRIND CAM
  • Designed for modified 80” to 88” motors
  • For use with high lift springs and collars
  • Very broad powerband to 6,000 rpm
EV27 GRIND CAM
  • Bolt-in street cam with fast open and close ramps
  • Similar timing to EV3, but designed to produce a very broad torque band
  • Pulls from 1,500 to 6,000 rpm
  • Uses stock springs; works with carbs or fuel injection
EV38 GRIND CAM
  • Lower lift exhaust for easy installation
  • Bolt-in for lighter bikes (FXLR, etc.)
  • Great mid-range and high-end power
  • Longer exhaust cam lowers oil temperature
EV51 GRIND CAM
  • Long duration for modified street motors
  • Works with stock hydraulics
  • Easy installation
  • Power range from 3,000-6,500 rpm
EV72 GRIND CAM
  • Upgraded EV7, for 92” or larger street motors
  • For use with Andrews springs and titanium collars
  • Very broad powerband, 2,800-6,000 rpm
  • OK for use with hydraulic lifters
NOTES:
Must check coil bind, valve-to-valve clearance and valve-to-piston clearance.

Customers Who Viewed This Item Also Viewed

1  item added to your cart.


Quantity:  Update

Availability: Warehouse

Cart Summary

Item in Cart: 1

Subtotal: $0.00

Part Numbers

DS-1991944in_stock
,
DS-1994433in_stock
,
DS-1994445in_stock
,
DS-1994474in_stock
,
DS-19909710in_stock
,
0925-00713in_stock
,
DS-1993209in_stock
,
DS-1994464in_stock
,
DS-19934410in_stock
,
DS-1994452in_stock
,
DS-1993277in_stock
,
DS-19932310in_stock

Request Info

ANDREWS CAMS
ANDREWS CAMS
Manufacturer: Andrews

Fill out your contact information to request information on this product, or contact us at the number below.

Phone: (724) 282-7278

Part Number:

Description:

Can't see this image?  Try refreshing by clicking on the refresh icon.Refresh CAPTCHA

Send To A Friend

Recommend this product to friends by entering up to four complete email addresses.


Can't see this image?  Try refreshing by clicking on the refresh icon.Refresh CAPTCHA

Delivery MethodRate*

* Listed shipping rates are calculated on this item alone, which may not apply if you have additional items in your cart. You may change your shipping preferences at any time by proceeding to your shopping cart.

Check out our current sales!
Hot Deals!

Check out our eBay Store.

Hours
SunClosed
Mon10:00 a.m.5:00 p.m.
Tue10:00 a.m.7:00 p.m.
WedClosed
Thur10:00 a.m.7:00 p.m.
Fri10:00 a.m.5:00 p.m.
Sat10:00 a.m.3:00 p.m.